|
glass fiber reinforced pom is a high strength, low friction engineering plastic that has excellent wear properties in both wet and dry environments.
Good dimensional stability and ease of machining make acetal an outstanding choice for applications requiring complex machining to tight tolerances.
Static dissipative ACETAL contains no carbon fibers or powders and is generally accepted for clean room use. With its surface resistivity of 109 to 1011 ohm/square and its excellent bearing and wear characteristics
Homopolymer and Copolymer Acetal(POM)
Homopolymer acetal (Delrin®) has superior room temperature strength, stiffness, and toughness.
Copolymer acetal has superior performance in continuous high heat and hot water environments. Copolymer acetal also tends to have less porosity than homopolymer acetal.
Glass Filled and Enhanced Grade Acetal(POM)
Acetal is available in glass-filled grades that offer enhanced strength and stiffness.
Acetal is also available in a number of enhanced bearing and wear grades including Delrin® AF, Delrin® AF blend, and TECAFORM™ HPV 13.
Acetal Grades and Colors
=Grades include:
-Homopolymer acetal
-Copolymer acetal
-FDA compliant
-Enhanced bearing and wear
=Glass-filled
=Colors include:
-Natural (white)
-Black
-Colors
Performance Characteristics
-Strong and stiff
-Excellent machinability
-Good dimensional stability
-Low moisture absorption
-Excellent wear properties in both wet and dry environments
-Low friction
-Good chemical resistance
Typical Applications
-Bearings and bushings
-Pump and valve parts
-Manifolds
-Gears
-Jigs and fixtures
-Packaging machinery parts
-Food processing machinery parts
-Electrical components
|
